Table of Contents
Advertisement
I
NTRODUCTION
Thank you for selecting the Martin LightCorder. The LightCorder is a DMX
recorder that can be used to record and playback DMX control signals. Please
familiarize yourself with this manual before using the LightCorder.
The LightCorder:
• Can be connected to any lighting console's DMX outlet and is ready to record.
• Allows you to easily transport DMX lighting programs wherever you go. Then
playback recorded shows at the touch of a button.
• Is a cost effective substitute for expensive on-site controllers. You can also use the
LightCorder to a back-up to your main lighting console.
F U N C T I O N A L H I G H L I G H T S
Some functional highlights of the product are:
• Record and playback DMX-512 shows in real time
• 6 minutes to 3 hours of recording time on an 8 MB memory card, with more than 28
hours on a 64 MB card
• 8Mb removable memory card included - up to 64Mb available
• PC-based scheduling program for scheduling of light shows
• Assignable faders allow for instant access to any lighting parameter
• Built in DMX monitor
The LightCorder is designed to be used by a range of people with a varying degree
of technical expertise. With that in mind a number of modes are used to restrict or
modify the functionality that is available for the various tasks and product users.
Configure and reco rd shows
Advanced mode is used to configure the LightCorder and to record DMX and is
designed for users who are used to working with intelligently controlled lighting
and DMX. This is the standard mode unless another mode is set and is described in
"Advanced mode" on page 11.
Introduction
1
5
Advertisement
Table of Contents
