Martin P3-100 System Controller Installation And Safety Manual User Manual page 4

• Particular attention must be paid to cooling; under no circumstances should the airflow to the heat sinks
be restricted. A rack fan cooling unit to maintain the correct ambient temperature should be considered
when multiple units are stacked together.
• The replacement fuse should be a 1AT (time delay) 250 V-rated 20 mm cartridge type only. Never attempt
to bypass a fuse.
• Replace the internal CR2032 lithium button cell battery with one of the same type only. Risk of explosion
if battery replaced by incorrect type. Dispose of used batteries according to the manufacturer's
instructions.
A T T E N T I O N !
• En cas d'équipement enfichable, la prise doit être montée près de l'équipement et doit offrir un
accès facile.
• Il y a un danger d'explosion s'il y a un remplacement incorrect de batterie. Mettre au rebut les
batteries usagées conformément aux instructions du fabricant.