ASL INTERCOM VAR8 Operation And Maintenance Manual page 90

VAR8 and Variants Operation, Commissioning, Fault Finding, and Maintenance Guide
5. Select if the DVA route should cause busy indication on the LEDs associated with microphone zone 5. Select if the DVA route should cause busy indication on the LEDs associated with microphone zone
select buttons. select buttons.
Menu: Configuration System Router Ctrl Remote Unit address <n> Route-trigger <nn> Menu: Configuration System Router Ctrl Remote Unit address <n> Route-trigger <nn>
This is typically set to 'On' when routing DVAs or microphone audio, and to 'Off' when routing
background music.
6. If required, any previously programmed routes may be cleared by selecting the Clear-all option.
Menu: Configuration System Router Ctrl Remote Unit address <n> Route-trigger <nn>
Reference to Configuration Tool
-
1
2
4
Is sue: 02 complete, approved
Page 90 of 166 Page 90 of 166
Control Busy=On or Busy=Off Control Busy=On or Busy=Off
Control Clear-all
5
3