Cancel All Dvas Button - ASL INTERCOM VAR8 Operation And Maintenance Manual

VAR8 and Variants Operation, Commissioning, Fault Finding, and Maintenance Guide
9.6.1.6

Cancel All DVAs Button

The button function is 'stop all DVAs'. Pressing the button stops DVAs playing to any zone. The
announcement will stop playing immediately, or play until its end depending on how the DVA is configured.
Note that contact DVAs, i.e., activated by Fire Panel, are not affected by the activation of this button.
To Program a Microphone Button for Cancel All DVAs:
1. Select the microphone button to be programmed.
Menu: Configuration System Router Inputs Mic/Line I/P #<nn> <mic type> Buttons
2. Program button for 'Cancel-all-DVAs'.
Menu: Configuration System Router Inputs Mic/Line Buttons I/P #<nn> <mic type>
3. For microphones provided with security key, program the security key as required by selecting the
'Protected' mode, and then the key-switch. By default the button is 'Not Protected'.
When protected, the key must be turned on for the button function to be allowed. One key-switch may be
configured to protect more than one button.
Menu: Configuration System Router Inputs Mic/Line I/P #<nn> <mic type> Buttons
-
Is sue: 02 complete, approved
Page 57 of 166
Cancel-all DVAs
Security