Inputs & Vca Menu - SoundCraft Si Performer User Manual

INPUTS & VCA MENU
The INPUTS & VCA menu provides information and access to all parameters and functions
concerning system inputs and VCA group masters..
NOTE: The IINPUTS & VCA button is greyed-out and not accessible unless a fader assigned
as an input or VCA is SELected.
Input (or VCA) Name: The name of the currently SELected input; press the SCROLL/ADJUST
Isolate:
NOTE: When isolated the channel settings are still stored when a cue is stored or updated.
NOTE: Mic amp gain and 48v are not included in the ISOlate since these are not
considered parameters of the channel as conflict could arise with 2 channels sharing
the same mic amp should one channel be isolated and the other not.
Type:
NOTE: Channels are always linked as an odd/even pair
Pan Mode:
LCR Pan Width:
Direct Out Pre/Post: Allows the pick-up point of the direct out to be set as either pre or
NOTE: Direct Out Pre/Post has no function and is not available unless a Direct Out
patch is made.
48
encoder to access the QWERTY keyboard to edit the name.
Isolates the input from automation playback and lights the ISOlate
indicator on the ACS when status is set as 'Enabled'.
Sets the channel as either Mono or Linked
LCR or LR (not available for stereo channels) When set to LCR pan
operates as LCR pan when both the LR and MONO routing keys are
active, pan operates as standard LR pan if only the LR routing key is
active or if the Pan Mode is set as LR.
Adjust the pan law when in LCR mode is active to increase/decrease
the contributions to the LR and Mono buses when panning.
post high pass filter.
Soundcraft Si Performer User Guide V1.1 1112