SoundCraft Si Performer User Manual page 43

Moving assignments on the active layer.
There are two types of functions that assist in re-ordering faders on a layer INSERT BLANK and
SHIFT each with a << (left) or >> (right) option, these functions are similar but subtly different.
•
•
The current active fader layer may be reset to the factory default using the RESET LAYER button.
NOTE: Fader assignments are stored per show.
NOTE: The assignments of the L&R and MONO/SEL faders may not be changed.
NOTE: It is possible for the surface to appear to 'blank' if a mix follow key is activated
and there are no contribution channel types to that mix type on that active layer – this
is correct and normal behavior.
NOTE: The same control fader may be placed a maximum of twice on any layer.
Soundcraft Si Performer User Guide V1.1 1112
INSERT BLANK will insert a blank (unassigned) fader in the SELected slot and move
all other assignments left (right).
SHIFT allows an assigned fader to be moved up (down) provided the adjacent slot
is unassigned.
43