Solo Menu & Solo Systems - SoundCraft Si Performer User Manual

SOLO MENU & SOLO SYSTEMS
Home screen displays all SOLO options available on the system. Si PERFORMER uses
intelligent automatic SOLOing to provide the best source for any given task or SOLO key
operation; indicators above the monitor volume encoder indicate the current state of the
SOLO system; the normal operation is as follows:
Single input SOLO – PFL
•
2 or more input SOLOs – AFL
•
Any output active – AFL
•
Solo keys are normally 'latching', temporary activation of any SOLO key is available by 'press
& hold', this method of operation causes the held key to be cancelled when it is released.
SOLO IN PLACE: Enables Solo In Place for input channels, status is indicated on the MENU
bar and with the SIP indicator light.
NOTE: While SIP is active other SOLO menu items may not be adjusted.
SOLO HIGHLIGHT: When 2 or more input SOLOs are active it is possible to 'highlight' an
individual channel by pressing and holding one of the active input SOLO keys, this has the
effect of attenuating contribution of other solo'd channels to the solo and monitor system.
The 'Highlight Level' (level of attenuation) is changed using the scroll/adjust encoder.
BLEND LEVEL: Sets the attenuation level of the primary monitor source while a PFL or
AFL is active; the default setting is -∞ (- infinity) resulting in complete mute of the normal
monitor source. This setting is changed using the scroll/adjust encoder to allow background
monitoring of the primary monitor source while PFL or AFL is active.
INPUT PRIORITY: When 'On' (default), allows input solos to temporarily override an output
AFL allowing monitor and control of contributions to a mix. If all active SOLOs are cleared the
system reverts to monitoring the active output AFL solos. When set to 'Off' any input SOLO will
cancel any output SOLOs and vice versa. Status is changed with the scroll/adjust encoder.
SOLO TRIM: Offers ±10dB of trim to the level of the SOLO bus to the monitor system
independent of the main monitor level control, this setting is changed using the scroll/
adjust encoder.
Soundcraft Si Performer User Guide V1.1 1112
45