Osc Menu - SoundCraft Si Performer User Manual

OSC MENU

Oscillator home screen displays all settings and parameters concerned with the oscillator
function.
ROUTE TO MIX/MTX: Enables routing of the oscillator to individual mix bus; the actual routing
to any given mix is enabled/disabled by the aux and matrix mix SOLO keys.
ROUTE TO ALL: Enables routing of the oscillator to all aux and matrix mixes.
NOTE: It is not possible to route directly to LR and MONO buses, for this function
route the oscillator to an aux mix then use the LR and MONO routing keys to route the
oscillator signal as required.
NOTE: Oscillator settings default to 'Off' following a power cycle.
LEVEL: Indicates level of the oscillator to any buses or output patch; the setting is changed
using the scroll/adjust encoder.
FREQUENCY: Indicates frequency of the oscillator for Sine type; the setting is changed using
the scroll/adjust encoder.
TYPE: Indicates the oscillator signal type; the setting is changed between Sine and Pink
using the scroll/adjust encoder.
OSCILLATOR OUT PATCH: Indicates patch point if any, assigned to the oscillator, by default
there is no output patched. Use the scroll/adjust encoder to highlight the item and select
a patch.
NOTE: Oscillator is always active when patched regardless of any other oscillator settings.
NOTE: Only Oscillator patches are stored per cue.
46
Soundcraft Si Performer User Guide V1.1 1112