Default Patching And Fader Layers - SoundCraft Si Performer User Manual

DEFAULT PATCHING AND FADER LAYERS

The fader layers on Si PERFORMER are arranged in a simple and logical form, by default the
fader layers are as follows:
A: Nominally first bank of mono channels (1-22 PERFORMER 2, 1-30 PERFORMER 3).
•
B: Nominally additional mono channels plus eight stereo channels
•
(23-36 plus stereo 1-4 and FX 1-4 Si PERFORMER 2, 31-52 plus stereo 1-4 and FX
1-4 Si PERFORMER 3).
C: Nominally all Mix bus masters (1-14)* and VCA Masters 1-8.
•
D: Nominally all Matrix bus masters (1-4)* and DMX Masters (A-D).
•
* Mixes 9-14 and matrix mixes 1-4 may be set to operate as mono or stereo without
affecting the number of simultaneous independent mixes you can have.
The FaderGlow system indicates the type of channel, bus or function is associated with any given
fader on the surface.
The patching system on Si PERFORMER is very flexible and allows almost any physical input to
be patched to any logical channel; the default patches on the Si PERFORMER are as follows:
Si PERFORMER 2 FADER INPUT PATCHING & LAYERS:
Mic In 1-22 > Channels 1-22 > Fader Layer A faders 1-22.
•
Mic In 23-24 > Channels 23-24 > Fader Layer B faders 1-2.
•
Unassigned inputs x12 > Channels 25-36 > Fader Layer B faders 3-14.
•
Line Inputs 1-8 > Channels 37-44 > Fader Layer B faders 15-18
•
(nominally stereo inputs 1-4).
Ste FX Returns 1-4 > Channels 45-52 > Fader Layer B faders 19-22
•
(nominally stereo inputs 5-8).
Si PERFORMER 3 FADER INPUT PATCHING & LAYERS:
Mic In 1-30 > Channels 1-30 > Fader Layer A faders 1-30
•
Mic In 31-32 > Channels 31-32 > Fader Layer B faders 1-2
•
Unassigned inputs x 20 > Channels 33-52 > Fader Layer B faders 3-22
•
Line Inputs 1-8 > Channels 53-60 > Fader Layer B faders 23-26
•
(nominally stereo inputs 1-4).
Ste FX Returns 1-4 > Channels 61-68 > Fader Layer B faders 27-30
•
(nominally stereo inputs 5-8).
Soundcraft Si Performer User Guide V1.1 1112
53