SoundCraft Si Performer User Manual page 49

Input Patch:
Direct Out Patch:
Channel Sends Post-Pre:
NOTE: Channel pre/post settings are stored per cue, a cue will need to be stored or
updated to make any change permanent.
Soundcraft Si Performer User Guide V1.1 1112
Displays the source patched to the channel; see PATCHING for details
of the system patching functionality.
Displays the destination patch of the channel direct out function; see
PATCHING for details of the system patching functionality.
It is possible to over-ride the pre/post fade settings imposed by the
bus masters on a per channel basis; click using the scroll/adjust
encoder to open the dialogue options of Cancel, All Post or All Pre.
Selecting All Post or All Pre will set all mix bus sends of the SELected
channel pre or post the channel fader. To flip the status of an individual
channel send to each bus pre or post scroll down the list of mixes
and use the scroll/adjust encoder to flip the channel send pre/post
as required.
49