Word Clock - SoundCraft Si Performer User Manual

WORD CLOCK

Si PERFORMER consoles can be set as Word Clock Slave or Master. The status is set from
the Clocking option in the SYSTEM menu.
When set to EXTernal the console will attempt to clock from incoming word clock, if clock is
detected the console will lock to with a CLOCK icon displayed on the title bar.
If there is no valid signal the icon is shown with an exclamation mark and the console will
run from internal clock until external clock returns.
NOTE: The Si PERFORMER has a single word clock connector, this operates as an output
when set to INTernal and as an input when set to EXTernal.
NOTE: Clock selection is stored as part of the console configuration
70
Soundcraft Si Performer User Guide V1.1 1112