SoundCraft Si Performer User Manual page 35

NEW SHOW: Invokes the creation of a
new show. A new show deletes all cues
and their associated events but retains
names, audio settings, patches and
similar since there is a high probability
these will be re-used in the 'new show'.
The system will provide a warning the
action will overwrite the current show and
allows the action to be aborted.
LOAD: Invokes loading of a new show
from the internal Multi-Media Card
(MMC-SD Card) or USB key if installed.
Use the scroll/adjust encoder to navigate
to the storage device and through the
folder structures to select the file to load.
The system will provide a warning that
the action will overwrite the current show
and allows the action to be aborted.
DELETE (not shown): This button allows the deletion of a selected file or folder within a
storage device. Use the scroll/adjust encoder to navigate to the storage device and through
the folder structures to select the file or folder to delete. The system will require a confirmation
of the action before any delete action is invoked and allows the action to be aborted.
NOTE: It is not possible to delete a folder containing files.
SAVE AS: Allows saving of the current
show. When pressed the QWERTY
keyboard opens and the <current
show name>. is displayed, this may
be modified to allow saving different
versions of a show such as 'SHOW –
MONDAY', 'SHOW – TUESDAY' etc. Press
the APPLY key to confirm the new show
name. Once the name is confirmed use
the scroll/adjust encoder as required to navigate to the storage device and through the
folder structures to select an alternative save location.
NOTE: If a file in the same folder has the same name a warning regarding file overwrite
is displayed with the optionfor the action to be aborted.
NOTE: When using the Off-Line Editor importing or saving shows opens a typical Windows
file open/save dialogue.
35
Soundcraft Si Performer User Guide V1.1 1112