Table of Contents
Advertisement
The individual POS system
Before switching on the system
Unpacking and checking that everything is there
Unpack the parts and check to see whether the delivery matches the
information on the delivery note.
The carton contains the basic unit, which may be equipped with a network
card, floppy drive, hard disk and VGA card, or a combination of these
components.
If damage has occurred during shipping or if the package contents do not
match the delivery note, inform your Wincor Nixdorf sales outlet
immediately.
Setting up the device
Set up the BEETLE /XL POS system where it will not be exposed to
extreme environmental conditions. Protect the device from vibrations, dust,
moisture, heat and strong magnetic fields.
To ensure that the BEETLE /XL has sufficient ventilation, make sure that
the side ventilation slots are kept clear:
Leave at least 100 mm clear to the right of the device.
Leave at least 30 mm clear to the left of the device.
We advise you to keep the original packaging in case you
transport the device in future (this protects it against
impact and shock).
Before switching on the system
Before switching on the system
GB - 11
Advertisement
Table of Contents
