Table of Contents
Advertisement
Scope of supply
Before switching on the system
Unpacking and verifying the scope of supply
Unpack the parts and check to see whether the delivery matches the
information on the delivery note.
The carton contains the basic unit and a country-specific accessories
kit. The basic unit can also be equipped with a network board, floppy
drive, hard disk or a VGA board, or a combination of these components.
If damage has occurred during shipping or if the package contents do
not match the delivery note, promptly inform your Wincor Nixdorf sales
outlet.
Setting up the device
Set up the BEETLE /L POS system where it will not be exposed to
extreme environmental conditions. Protect the device from vibrations,
dust, moisture, heat and strong magnetic fields.
Make sure that the side ventilation slots on the BEETLE /L POS
system are not obstructed in order to ensure that the device has
sufficient ventilation.
The following must be observed if the system is to be mounted
vertically and horizontally:
GB - 12
BEETLE /L - the individual POS system
Transport the device only in its original packaging
(to protect it against impact and shock).
A closed area made of non flammable material (e.g.
concrete or metal) must be located under the vertically
mounted BEETLE /M.
Scope of supply
Advertisement
Table of Contents
