Crestron CHV-TSTAT Operation And Installation Manual page 19

Crestron CHV-TSTAT and CHV-THSTAT
SETUP: HUM/FAN OPTS
MODE
Disp Humidity Pgs?
Cold Weather Comp?
Run Fan in Ht Calls?
VIEW
CRESTRON
SETUP: DEVICE OPTS
MODE
Network ID:
LCD Contrast
VIEW
Firmware
Version [0.1] Bld 133
CRESTRON
Operations and Installation Guide - DOC. 8163
NOTE: Setting the HP Balance Point to 0º can disable Heat pump. Setting the Aux
Balance Point to 90º can disable Aux Heat.
HUMIDIFIER/FAN OPTIONS
Press the MODE button to access the SETUP HUMIDIFIER/FAN OPTIONS. Press
VIEW to select option. Press the Arrow keys (▲▼) to select the value of the
parameter.
Display Humidity Pages?
Yes or No
Cold Weather Compensation?
Yes or No. Modifies the humidifier output
Y
to prevent condensation on the windows.
Y
Requires an outdoor temperature source
N
Run Fan in Heat Calls?
Yes or No
Most heating systems run the fan
automatically. If your heating system
requires fan control, select Yes.
DEVICE OPTIONS
Press the MODE button to access the DEVICE OPTIONS. Press VIEW to select
options. Press the Arrow keys (▲▼) to select the value of the parameter.
Select Network ID
Valid entries are 03 to FE in Hex
to match the network ID set for the
thermostat in SIMPL Windows
2E
Select LCD Screen Contrast
5
(1 Lighter through 10 Darker)
Thermostats: CHV-TSTAT and CHV-THSTAT • 15
Thermostats