Safety Instructions - Themis RES-XR4-1U Installation Manual

1ru 19” rack-mount rugged enterprise server
Table of Contents

Advertisement

Safety Instructions

To maximize user safety and ensure correct device operation, all instructions con-
tained in this section should be read carefully.
WARNING: All equipment connected to the product must conform to their standards
WARNING: This Themis PRODUCT must be used in sheltered environments only, and
at an altitude of less than 3048 meters (10,000 ft).
The device must be used in accordance with the instructions for use.
Electrical installations in the room must correspond to the requirements of
respective regulations.
Take care that there are no cables, particularly mains cables, in areas where
persons can trip over them.
Do not use a mains connection in sockets shared by a number of other power
consumers. Do not use an extension cable.
Only use the mains cable supplied.
Power cord requirements:
Europe: A power supply unit operating at a nominal voltage of 240V must use
a power cord rated for a minimum operating voltage of 200V and is not to be
used with an operational voltage below 200V
USA: A power supply unit operating at a nominal voltage of 120V must use a
power cord rated for a minimum operating voltage of 100V and is not to be
used with an operational voltage below 100V
Themis Computer
Caution: It is important that the user observe all warnings and instructions
that are on the device and contained in this manual.
Caution: The protection of the building serves as protection for the equip-
ment.
Caution: When rack mounted, never lean on the server. It is prohibited to lean
on the server while it is pulled on slide rails (telescopic rails) outside of the
rack (bay). Personal injury and equipment damage can occur.
RES-XR4-1U Installation Manual
Safety Instructions
v

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents