Safety Instructions - Themis CoolShell CS-3U Installation Manual
Multiple-cpu, multiple-core 64-bit scalable server / rugged 3u-high subrack
removable 1u-high components cpu i/o blades, media module, 2 power supplies
pci-e xp re s s / sata / multiple gigabit ethernet, sfp optical transceiver, usb ports
Table of Contents
Advertisement
CoolShell CS-3U Installation Manual
Safety Instructions
To maximize user safety and ensure correct device operation, all instructions con-
tained in this section should be read carefully.
•
Take care that there are no cables, particularly mains cables, in areas where
persons can trip over them.
•
Do not use a mains connection in sockets shared by a number of other power
consumers. Do not use an extension cable.
•
Only use the mains cable supplied.
•
The unit is completely disconnected from the power source only when the
power cord is disconnected from the power source. Therefore the power cord
and its connectors must always remain easily accessible.
•
Do not set up the device in the proximity of heat sources or in a damp location.
Make sure the device has adequate ventilation.
•
All plugs on the connection cables must be screwed or locked to the chassis
housing.
•
The device is designed to be used in horizontal position only.
•
Repairs may only be carried out by a person authorized by Themis Computer.
•
If extensions are made to the device, the legal stipulations and the device spec-
ifications must be observed.
•
The CoolShell CS-3U power cord(s) should be disconnected before removing
or replacing any CoolShell CS-3U components (Blade or Module).
iv
Caution: It is important that the user observe all warnings and instructions that
are on the device and contained in this manual.
Themis Computer
Advertisement
Table of Contents
