Safety Instructions - Themis RES-32XR3/FIO Installation Manual

3ru 19” rack-mount rugged enterprise server with x8dah+-f motherboard configuration/two quad-core 5500 or quad/six-core 5600 xeon cpus
Hide thumbs Also See for RES-32XR3/FIO:
Table of Contents

Advertisement

RES-32XR3/FIO Installation Manual

Safety Instructions

To maximize user safety and ensure correct device operation, all instructions con-
tained in this section should be read carefully.
The device must be used in accordance with the instructions for use.
Electrical installations in the room must correspond to the requirements of
respective regulations.
Take care that there are no cables, particularly mains cables, in areas where
persons can trip over them.
Do not use a mains connection in sockets shared by a number of other power
consumers. Do not use an extension cable.
Only use the mains cable supplied.
The unit is completely disconnected from the power source only when the
power cord is disconnected from the power source. Therefore the power cord
and its connectors must always remain easily accessible.
Do not set up the device in the proximity of heat sources or in a damp location.
Make sure the device has adequate ventilation.
All connection cables must be screwed or locked to the chassis housing.
The device is designed to be used in horizontal position only.
The device is no longer safe to operate when
— the device has visible damage or
— the device no longer functions.
In these cases, the device must be shut down and secured against unintentional
operation.
Repairs may only be carried out by a person authorized by Themis Computer.
The device may only be opened for the installation and removal of extension
(PCI) cards, memory modules, storage drives, fan housings, power supplies,
iv
Caution: It is important that the user observe all warnings and instructions
that are on the device and contained in this manual.
Themis Computer

Advertisement

Table of Contents
loading

Table of Contents