Ml Control Panel - Kemppi Promig 520R Operation Instructions Manual

4.2. ML CONTROL PANEL

S31 S34 S35
P31 R31 P32
MIG basic operations
Welding method selection (S31): no function
Control mode selection (S32): local, remote
Local controls: wire feed speed/welding power/(R31), welding voltage (R32)
Controls for MIG welding dynamics (R33)
Digital displays: wire feed speed (P31), current (P32), voltage (P33)
Retrieval of last actual welding values (S33)
SYNERGIC operations
SYNERGIC mode switch S34
MIG
Normal MIG welding with independent adjustments for wire feed speed (R31)
and voltage (R32).
1-MIG
SYNERGIC MIG: MIG welding with parameters which are pre-set according
to filler wire (S35, S36). Welding parameters are adjusted with adjustment
potentiometers for welding power (R31) and arc length (R32).
SYNERGIC PULSEMIG: Pulsed MIG welding with parameters which are pre-set
according to filler wire (S35, S36). Welding parameters are adjusted with adjustment
potentiometers for welding power (R31) and arc length (R32).
Gun cable length compensation (R34)
© KEMPPI OY
S36 R34 R33
R32 P33 S32
S33
PROMIG 520R, 120R / 0544 – 17