Information - Eiki LC-XN200 Owner's Manual

Hide thumbs Also See for LC-XN200:
Table of Contents

Advertisement

Remote control code
The projector is assigned 10 different remote control codes (Code 0-9).
The remote control code should be the same one from the projector and the remote control.
As setting the remote control as Code 7 to operate the projector, the remote control code on the
projector also must be switched to Code 7.
Change the projector's code: Select "Remote control" in setting menu. Choose the code.
Change the remote control code: Press the OK and the number key (0-9) on the remote control for
more than 5 seconds to switch the code.
 Note:
- The default remote control code is Code 0.
- If the remote control code set on the projector and remote control is different, it will not execute
any operation. In this case, switch the remote control code to the same one with the projector.
- The remote control code will be reset after the battery is removed for a long period of time.
The information menu is used to detect signal of projected image and running state.
Menu operation
Press MENU button to display the screen
menu. Press  to select information icon,
the information menu will appear and the
information is displayed.Shown as the right
image.
See below for displayed information.
Input
The selected input source is displayed.
H-sync freq .
The horizontal frequency of the input signal is
displayed in KHz or - - - -KHz when no signal.
V-sync freq .
The vertical frequency of the input signal is
displayed in Hz or - - - - Hz when no signal.
Numbers of Hz doubles when during Interlace.
Screen
The selected screen size is displayed.
Language
The selected language is displayed.

Information

Input
H-sync freq.
V-sync freq.
Screen
Language
Lamp status
Lamp counter
Power managementter
Key lock
Exit
Lamp status
The selected lamp mode is displayed.
Lamp Time
Display the cumulative used time of the lamp.
Power management
Off, Ready or Shut down is displayed.
Key lock
Display Off, Remote Control or the Projector.
Information
S-video
---- KHz
---- Hz
Normal
English
36 H
0 H
Off
5 Min
Move
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lc-wxn200Lc-xn200lLc-wxn200l

Table of Contents