Remote Control
②
③
④
⑨
⑪
⑫
⑪
*Laser Transmitting Window:
Laser beam will emit from this window. While
pressing LASER button during the projection
to use the remote control as a laser pointer.
Do not stare directly at the laser transmitting
window or aim the window at human body, to
avoid any physical injury.
① POWER
Turn on or turn off the projector.
② LASER
Press this button during projection, the
remote control can be used as a laser
pointer.
③ HDMI
Select "HDMI" as input source.
①
*
⑤
⑥
⑦
⑧
⑩
⑭
⑬
Part names and functions
④ DVI
Select "DVI" as input source.
⑤ VGA
Select "VGA IN 1" or "VGA IN 2" as input
source.
-VGA IN 2 can not be selected
when using the VGA IN 2/ VGA OUT
terminal as MONITOR OUT output."
- Press VGA button directly to switch VGA
IN 1 or VGA IN 2.
⑥ VIDEO
Select "Video" as input source.
⑦ RGBHV
Select "RGBHV" as input source.
⑧ COMPONENT
Select "Component" as input source.
⑨ USB
Select Image Viewer as input source.
Press this button again to select USB
Autorun.
Every time pressing this button, input source
becomes as follows:
Image Viewer
- USB Autorun
- Image Viewer
⑩ S-VIDEO
Select "S-video" as input source.
⑪
- Select item or adjust data in screen menu.
- Select the image display area in digital
zoom + mode.
⑫ AUTO
Enter auto setup adjust mode.
⑬ OK
Enter the menu or select an item in the
menu.
⑭ VOL+
Increase the volume level.
13