Table of Contents
Advertisement
ZIGBEE Networking Instructions
ZIGBEE Networking
Function : Control the projector, KeyStone, LenzShift, Blending.
Preparation:
Equipments: PC 1 pcs, projector 1 pcs, ZIGBEE module 1 pcs, ZIGBEE antenna 1 pcs.
Computer configuration
■Note: For the first networking, you have to complete the PC configuration before power-on the
projector. Such limitation will be disabled upon successful networking.
Please run as Administrator when operating in the WIN7 or WIN8 system.
1. Connect the zigbee antenna to the ZIGBEE port.
2. Insert the ZIGBEE module into PC, and a prompt appears in the lower right corner of the PC, as
shown below:
3. Install the driver, as shown below.
Open file "CP210x driver" in the CD ROM supplied with the projector, double-click
"CP210xVCPInstaller.exe" under "CP210x driver" and click "Install" as below:
After clicking "Install", a prompt box of "Installation Successful" displays. Click OK and the driver
installation is completed, as shown below:
86
OK
Advertisement
Table of Contents
