Table of Contents
Advertisement
Moving the projector
When moving the projector, cover the lens
cap and retract the adjustable feet to prevent
damage to the lens and cabinet. Put it into
a carton with the lens facing upwards if the
projector is not in use for a long period.
Notes on Lens Protective Ring
Before operating the projector, remove the lens
protective ring. In case of transportation, press
LENS SHIFT button on the side control or on
the remote control for over 5 seconds to let the
lens back to its central position and put on the
lens protective ring to protect the lens.
Lens Protective Ring
Caution in moving or transporting the
projector
– Do not drop or bump the projector, otherwise
damages or malfunctions may result.
– When carrying the projector, use a suitable
carrying case.
– Do not transport the projector by courier or
any other transport service in an unsuitable
transport case. This may cause damage
to the projector. For information about
transporting the projector by courier or any
other transport service, consult your dealer.
– Do not put the projector in a case before it is
cooled enough.
Notes on Projector Handling
When lifting or moving the projector, do not
hold the lens and the peripheral part to prevent
damage on the lens or projector.
Be careful in handling the projector. Do not
drop or bump it to avoid strong force, or place
other objects on the cabinet.
Note:
The lens of the projector is electric.
When operating the projector, pay
attention to the following conditions.
When the lens is rotating, do not
touch it, otherwise your fingers may
get hurt.
People who are not familiar with the
projector must not touch the lens.
Do not hold the lens and the peripheral part.
Safety Guide
7
Advertisement
Table of Contents
