Menu Bar - Eiki LC-XN200 Owner's Manual

Menu bar

①
②
③
④
⑤
⑥
⑦
⑧
⑨
① PC adjust menu
Adjust computer parameters to match with VGA input signal format: Auto PC adj., Fine sync,
Total dots, Horizontal, Vertical, Clamp, Display area H, Display area V, Reset, Mode free,
Store.
② Screen menu
If a computer is selected as a signal source, the following setup options for the image size are
available: Normal, Wide, True, Full, Custom or Digital zoom +/- .
If video equipment is selected as a signal source, the following setup options for the image size
are available: Normal, Wide or Custom (for XGA models) / Normal, Full, Wide or Custom(for
WXGA models).
③ Image select menu
The available image modes are: Dynamic, Normal, Cinema, Blackboard (green), Colorboard
or User Image.
④ Image adjust menu
If a computer is selected as a signal source, the following image adjusting options are available:
Contrast, Brightness, Color temp., White balance (R/G/B), Sharpness and Gamma.
If video equipment is selected as a signal source, the following image adjusting options are
available: Contrast, Brightness, Color, Tint, White balance (R/G/B), Sharpness, Gamma,
Noise reduction and Progressive.
⑤ Input menu
Select an input source from HDMI, DVI, VGA IN 1, VGA IN 2, Component, S-video, Video,
RGBHV, Network, Image Viewer, USB Autorun.
⑥ Sound menu
Adjust the volume level or mute the sound.
⑦ Setting menu
Configure operation settings of the projector.
⑧ Network menu
Access the network function.
⑨ Information menu
Display the system information of the projector.
Main menu
Auto PC adj.
Fine sync
Total dots
Horizontal
Vertical
Clamp
Display area H
Display area V
Reset
Mode free
Store
Exit
Sub menu
PC adjust
Move Next Next
Basic operation
0
1
0
27