Input Select(Analog:vga In 1/Vga In 2/Rgbhv); Computer Input - Eiki LC-XN200 Owner's Manual

Input select(Analog:VGA IN 1/VGA IN 2/RGBHV)

Direct operation
- Press INPUT button on the side panel to
select VGA IN 1, VGA IN 2 or RGBHV.
- Press VGA or RGBHV button directly on the
remote control.
- Press VGA button directly on the remote
control to switch VGA IN 1 or VGA IN 2.
Menu operation
1 Press MENU button on the remote control to
display the screen menu. Press  button
to select Input icon, then press OK button.
2 Press  button to select VGA IN 1, VGA
IN 2 or RGBHV, then press OK button.
When input source is from
VGA IN 1
computer connected to
COMPUTER IN 1 terminal with
VGA cable, please select
VGA IN 1.
When input source is from
VGA IN 2
computer connected to
COMPUTER IN 2/MONITOR
OUT terminal with VGA cable,
please select VGA IN 2.
When input source is from
RGBHV
computer equipment connected
to BNC terminal with BNC*5
cable, please select RGBHV.

Note:
- VGA IN 2 can not be selected when using the VGA IN 2/ VGA OUT terminal as MONITOR
OUT output.(Page 52)
- When the Input Search function is set to On in the Auto setup function, the input signal will be
searched automatically.(Page 49)

Computer input

Side control
INPUT
Remote control
AUTO SETUP
Input menu
Input
HDMI
DVI
VGA IN 1
VGA IN 2
Component
S-video
Video
RGBHV
Network
Image Viewer
USB Autorun
Exit
VGA
RGBHV
Output
1024x768@60
Move Next Next
33