Auto PC adjustment
Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and
Vertical to conform to your computer.
Menu operation
Auto PC adjustment
1 Press MENU button on side control panel
or remote control to display the on screen menu.
Press
button to select the PC adjust icon
and press OK button.
2 Press
button to select Auto PC adj., and
then press OK button.
To store the adjusted parameters
The system parameters adjusted in the Auto PC
Adjustment can be stored in the projector.(Page 38 )
√ Note:
● Total dots and horizontal & vertical positions of some computers cannot be fully adjusted with this
Auto PC Adjustment function. When the image is not provided properly with this function, manual
adjustments are required.
● The Auto PC Adjustment cannot be operated when 480i, 575i, 480p, 575p, 720p, 1035i or 1080i is
selected in the PC System Menu.
PC adjust menu
PC adjust
Auto PC adj.
Fine sync
Total dots
Horizontal
Vertical
Clamp
Display area H
Display area V
Reset
Mode free
Store
Exit
Computer input
0
1
0
Move
Next
Next
37