Table of Contents
Advertisement
Information
The information menu is used to the detect signal of projected image and running state.
Menu operation
Press MENU button on the remote control
or control panel to display the screen menu.
Press to select Info., the information menu
will appear as the right picture.
The status of projector will display in
information menu.
Input
The selected input source is displayed.
H-sync freq .
The horizontal frequency of the input signal is
displayed in KHz or - - - -KHz when no signal is
detected.
V-sync freq .
The vertical frequency of the input signal is
displayed in Hz or - - - - Hz when no signal is
detected.
Light source status
The setting status of "Light source mode" is
displayed.
Light source counter
The usage time of the light source is displayed.
Power management
The setting status of "Power management" is
displayed.
Image mode
The setting status of "Image mode" is
displayed.
OSD setting-Info.
info. menu
Info.
Input
1024 x 768, 60Hz
H-sync freq.
V-sync freq.
Light source status
Light source counter
Power management
Image mode
Computer 1
48.24 kHz
60.06
Hz
2
H
Ready
5
Min
Standard
55
Advertisement
Table of Contents
