Table of Contents
Advertisement
Part names and functions
Side control panel
①
②
③
④
⑤
AUTO SETUP
⑥
① UP/DOWN/LEFT(VOL-)/RIGHT(VOL+)
- Select item or adjust data in screen menu.
- Select the image display area in digital
zoom + mode.
- Adjust the volume.
② SELECT
Enter screen menu or execute selected
items.
③ INPUT
Select an input source.
④ LENS SHIFT
Enter lens shift mode.
⑤ AUTO SETUP
Perform various settings configured
automatically.
⑥ ZOOM
Enter zoom adjust mode.
⑦ MENU
Open or close the screen menu.
⑧ FOCUS
Enter focus adjust mode.
12
Indicators
⑩
⑪
⑦
⑫
⑧
⑬
⑭
⑨
⑨ ON/STAND-BY
Turn on or off the projector.
⑩ POWER
- Lights red when the projector is in stand-
by mode.
- Lights green during operations.
- Flashes green when the projector is in
power management mode (stand-by).
⑪ LAMP
Lights green during operations.
⑫ WARNING TEMP
Flashes red when the internal temperature
of the projector is beyond the operating
temperature range.(Page 58,66)
⑬ WARNING FILTER
Lights red when the service life of the filter
is over. You should replace it with a new
one immediately.(Page 59)
⑭ LAMP REPLACE
Lights yellow when the service life of the
lamp is over. You should clean it with a new
one immediately.(Page 61)
Advertisement
Table of Contents
