Basic operation
Auto setup
This function is available just by pressing
the AUTO SETUP button on the side control
or AUTO button on the remote control. The
system then automatically performs various
settings in the setup menu, including Input
search and Auto PC adjust.
Lens shift adjustment
1. Perform the lens shift adjustment with LENS
SHIFT button on side control or on the
remote control.
2. Lens shift appears on the screen. Press
point button to adjust the screen to
desired position without any image distortion.
The screen may deviate up-and-down from
the central axis of lens shift at most 50% top
and bottom or at most 10% left-and-right.
3. Press and hold LENS SHIFT button on side
control or remote control for over 5 seconds
to move the lens back to central position.
√ Note:
When the lens is not under shift adjustment,
the arrow displays in green.
When the lens is under shift adjustment, the
arrow turns yellow.
When the lens shift reaches its greatest
extent, the arrow turns red.
Zoom adjust
1. Perform zoom adjustment with ZOOM button
on side control panel or on the remote
control.
2. "Zoom" appears on screen. Press button
to zoom in or zoom out the image.
Focus adjust
1. Perform focus adjustment with FOCUS
button on side control panel or on the remote
control.
2. "FOCUS" appears on screen. Press
button to adjust the focus of the image.
28
Side control
LENS SHIFT
AUTO SETUP
AUTO SETUP
Remote control
AUTO
FOCUS
LENS SHIFT
Lens Shift
ZOOM +
FOCUS +
FOCUS
ZOOM
ZOOM