Refi T And Check Window - Valor 785JLN Owner's Manual

Refi t and Check Window
1. To refi t the window, place it in its bottom railing and
rotate its top against the fi rebox.
2. While you hold it, pull the side levers back into the
window brackets on each side.
IMPORTANT: To ensure a safe operation, verify
that the levers are hooked properly to the window
tabs; then, pull out the top of the window and
release it to insure the springs return it.
3. Apply light hand pressure against the window frame
sides to bed-in the window seal.
4. If the Hot Glass Warning
plate has been removed from
the front lower corner of the
window, reinstall it by sliding
it between the glass and the
frame as indicated below.
Hot Glass Plate
Installation
Window frame
Bottom railing
QUALIFIED
INSTALLER
31