Re-Install And Check Window - Valor 738KN Installation & Owner's Manual

Re-install and Check Window

1. To refi t the window, hook its top part to the fi rebox's
opening frame. Make sure that the wider part of
the window frame is at the bottom. The top part
is marked.
2. While you hold it, push in and turn the two top spring-
loaded bolts a quarter turn to engage their pin.
3. Push in the bottom of the window against the fi rebox
and fasten the two bottom spring-loaded bolts a
quarter turn.
4. If the Hot Glass Warning plate has been removed
from the front lower corner of the window,
reinstall it by sliding it between the glass and
the frame as indicated.
Hot Glass Warning Plate
Installation
Bottom
of window
(wider frame)
QUALIFIED
INSTALLER
37