Replacing The Processor - Gateway 3-Bay mBTX Pro User Manual

Replacing the processor

To replace the processor:
1
2
3
4
5
6
www.gateway.com
Tools
You need a Phillips screwdriver to replace the processor.
Remove the side panel by following the instructions in
page 122.
Remove the bezel by following the instructions in
Caution
Be careful not to pull or damage the hard drive power and data cables when
you remove the metal reinforcing beam/hard drive assembly.
For more stability, place your computer on its side. To avoid scratching the case, place it
on a towel or other non-abrasive surface.
Remove the fan assembly by squeezing it slightly (top to bottom) and pulling it away from
the case.
Lift the 5.25-inch component bay from the chassis to remove it.
Disconnect the fan cable from the system board.
"Removing the side panel" on
"Removing the front bezel" on page
.
124.
137