Table of Contents
Advertisement
7
Replace the computer cover. (See "Closing the case" on page 14 for
instructions.)
8
Reconnect the cords you removed, then turn on the computer.
If the computer does not start, make sure that you installed the power supply
correctly. Also check that the voltage selector switch on the back of the power
supply is set correctly.
Replacing the processor
Your system board currently supports the Intel Celeron processor. See the
Gateway Web site at www.gateway.com for updates on processor speeds
supported by your system.
When replacing a processor, order a processor upgrade kit. The kit includes
the processor and a heat sink..
Warning
To replace the processor:
1
Turn off the computer, disconnect the power cord, and disconnect the
modem cord, if your computer has a modem
2
Open the case by following the instructions on page 12, observing the
static electricity precautions on page 11.
It is critical that a heat sink be installed on the processor
to provide sufficient cooling.
Replacing the processor
33
Advertisement
Table of Contents
