Program; Common Parameters; Voice - Korg RK-100S Parameter Manual

Keytar

Hide thumbs Also See for RK-100S:

Table of Contents

RK-100S parameter guide

PROGRAM

Here you can adjust settings that apply to the entire program as well as the settings

that specify how the timbres will sound. You can choose whether to use only a

single timbre (SINGLE), or how to use two timbres (LAYER, SPLIT, MULTI).

Voice Mode

This parameter determines how many timbres a program will use, and how those

timbres will be allocated.

SINGLE: Only one timbre will be used.

LAYER: Two timbres will be used. When you play the keyboard, both timbres

will sound simultaneously. You can edit each timbre individually.

[SINGLE, LAYER, SPLIT, MULTI]

SPLIT: Two timbres will be used. You can specify a range of notes for each timbre,

and play each timbre from a different area of the keyboard. Each timbre can be

edited separately.

MULTI: Two timbres will be used. This mode is mainly used when playing the

RK-100S from an external MIDI device. Each timbre can be edited separately.

SPLIT KEY

This parameter will appear if "Voice Mode" is set to "SPLIT." It specifies the

range where each timbre will sound. Notes below the note number you specify

will be sounded by timbre 1, and notes above (and including) that number will

be sounded by timbre 2.

TIMBRE 2 MIDI CH.

When the "Voice Mode" is set to either Layer or Multi, this parameter can be used

to set the MIDI channel for timbre 2. If you choose Global, the MIDI channel of

timbre 2 will match the global MIDI channel.

Note: The Global MIDI channel can be set by the shift function of the RK-100S.

Note: The MIDI Channel of timbre 1 will match the global MIDI channel set by

the RK-100S.

[C-1...G9]

[GLOBAL, 01...16]

Table of Contents