Table of Contents
Advertisement
RK-100S parameter guide
Mod Intensity
Adjusts the depth of modulation applied by the modulation source
Mod Response
Adjusts the response of the modulation effect
A setting of 0 produces slow response.
LFO Tempo Sync
Specifies whether the LFO cycle will synchronize to the tempo set by the TAP
button or via the MIDI clock
If this is Off, the LFO will function at the cycle specified by "LFO Frequency"
If this is On, the LFO will synchronize to the tempo or MIDI clock.
Note: This parameter will be displayed and can be set if the "Mod Source" is LFO.
Note: In the Global MIDI "MIDI Clock" setting is Internal, the LFO will synchro-
nize to the tempo specified by the TAP button. If the setting is Auto, the LFO
will synchronize to the MIDI clock received from an external MIDI device.
LFO Frequency
Sets the LFO speed. Increasing this value will result in a faster frequency
Note: This parameter will be displayed and can be set if the "Mod Source" is
LFO and the "LFO Tempo Sync" is Off.
If this parameter is assigned to the "Long Ribbon (Filter)", it can be switched
to "LFO Sync Note" if "LFO Tempo Sync" is On.
LFO Sync Note
Sets the LFO frequency as a proportion of the tempo set by the TAP button
The length of the specified value (note value) relative to the tempo will be one
cycle of the LFO. For example if this is 1/4, one cycle will occupy one quarter note.
For example if this is set to 1/4, the LFO cycle will be one beat long. If this is set
to 3/4, the LFO cycle will be three beats long.
Note: This parameter will be displayed and can be set if the "Mod Source" is
LFO and if "LFO Tempo Sync" is On.
If this parameter is assigned to the "Long Ribbon (Filter)", it can be switched
40
[–63...+63]
to "LFO Sync Note" if "LFO Tempo Sync" is Off.
LFO Waveform
[000...127]
Selects the LFO waveform
Note: This parameter will be displayed and can be set if the "Mod Source" is LFO.
[Off, On]
[0.01...100.0Hz]
LFO Shape
Adjusts the shape of the LFO waveform
Note: This parameter will be displayed and can be set if the "Mod Source" is LFO.
LFO KeySync
Specifies how the LFO will be reset at note-on
Note: This parameter will be displayed and can be set if the "Mod Source" is LFO.
[8/1...1/64]
With Off, the LFO phase will not be reset when note-on occurs.
With On, the first note-on from a condition of no keys being pressed will reset the
LFO to the phase specified by the "LFO Init Phase" parameter and modulation
will be applied at that phase even if subsequent note-ons occur.
[Saw, Square, Triangle, Sine, S&H]
SAW
SQUARE
SINE
TRIANGLE
S&H
Note on
Amplitude changes irregularly
(Sample & Hold)
[–63...+63]
[Off, On]
Advertisement
Table of Contents
