Table of Contents
Advertisement
RK-100S parameter guide
C Feedback
Sets the feedback amount of TapC
Trim
Sets the input level
Spread
Sets the width of the stereo image of the effect sound
The stereo image is widest with a value of 127, and the effect sound of both
channels is output from the center with a value of 0.
Auto Panning Delay
This is a stereo delay that uses an LFO to pan the delay sound between left and
right.
Stereo In - Stereo Out
Left
Delay
Trim
Delay
Trim
Right
LFO
LFO Shape
Dry/Wet
Sets the balance between the effect and dry sounds
Delay Tempo Sync
See page 44 "Delay Tempo Sync"
Time Ratio
See page 45 "Time Ratio"
46
High Damp
Pan
Feedback
MOD Depth
Pan
High Damp
LFO Spread
[Dry, 99:1...1:99, Wet]
[Delay Tempo Sync Off: 0.5...400.0%/
Delay Tempo Sync On: 12.5...400.0%]
[000...127]
L Delay Time
R Delay Time
[000...127]
See page 45 "L Delay Time, R Delay Time"
Feedback
[000...127]
See page 45 "Feedback"
Mod Depth
Specifies the depth of modulation
LFO Tempo Sync
Specifies whether the LFO cycle will be synchronized with the tempo specified
by the TAP button or the MIDI clock
See page 40 "LFO Tempo Sync"
LFO Frequency
Dry / Wet
Sets the LFO speed
Note: This parameter will be displayed and can be set if "LFO Tempo Sync" is Off.
See page 40 "LFO Frequency"
LFO Sync Note
Sets the LFO frequency as a proportion of the tempo set by the TAP button
Dry / Wet
Note: This parameter will be displayed and can be set if "LFO Tempo Sync" is On.
See page 40 "LFO Sync Note"
LFO Waveform
Selects the LFO waveform
See page 40 "LFO Waveform"
[Off, On]
LFO Shape
See page 40 "LFO Shape"
LFO KeySync
Specifies whether the LFO will be reset by note-on
[000...1400msec, 1/64... 1/1]
[000...1400msec, 1/64... 1/1]
[000...127]
[000...127]
[Off, On]
[0.01...100.0Hz]
[8/1...1/64]
[Saw, Square, Triangle, Sine, S&H]
[–63...+63]
[Off, On]
Advertisement
Table of Contents
