Cc # Map - Korg RK-100S Parameter Manual

Keytar

Hide thumbs Also See for RK-100S:

Table of Contents

RK-100S parameter guide

CC # MAP

Control changes can be assigned to main parameters.

All parameters assigned with control changes will change simultaneously. In

addition, if a parameter concerning the long ribbon controller is specified here,

the specified control change will be transmitted. All other main parameters can

only be received (see page 58 "MIDI messages").

(Parameter)

This selects the parameter to be assigned.

(Value)

This specifies the MIDI control change number (CC#) for the parameter selected

in the "Parameter" field.

Note: If the timbre parameter is selected, the effect will be applied to timbre 1

and timbre 2.

Note: The MIDI channel of the vocoder parameters is the same MIDI channel

for timbre 1.

[Portamento...Vocoder.EF.SENS]

[Off, CC#00...CC#119]

Table of Contents