Table of Contents
Advertisement
Chorus
This effect adds thickness and warmth to the sound by modulating the delay time
of the input signal. You can add spread to the sound by offsetting the phase of
the left and right LFOs from each other.
Stereo In - Stereo Out
Left
Trim
Trim
Right
LFO
Dry/Wet
Sets the balance between the effect and dry sounds
Mod Depth
Sets the depth of LFO modulation
LFO Frequency
Sets the LFO speed. Increasing this value will result in a faster frequency
See page 40 "LFO Frequency"
LFO Spread
Sets the LFO phase difference between the left and right
PreDelay L
PreDelay R
Sets the delay times for the left and right channels
Trim
Sets the input level
Dry / Wet
HEQ
Chorus
HEQ
Chorus
Dry / Wet
LFO Spread
[Dry, 99:1...1:99, Wet]
[000...127]
[0.01...100.0Hz]
[–180...180°]
[00.0...50.0ms]
[00.0...50.0ms]
[000...127]
High EQ Gain
Sets the gain of High EQ
Flanger
This effect gives a significant swell and movement of pitch to the sound. It is more
effective when applied to a sound with a lot of harmonics. This is a stereo flanger.
Stereo In - Stereo Out
Left
Right
LFO
LFO Shape
Dry/Wet
Sets the balance between the effect and dry sounds
Delay
Sets the delay time in millisecond steps
Mod Depth
Sets the depth of LFO modulation
Feedback
Sets the amount of feedback for the left and right channels
Phase
This switches the phase of the output and feedback
LFO Tempo Sync
Specifies whether the LFO cycle will be synchronized with the tempo specified
by the TAP button or MIDI clock
Effect guide
[–15.0...+15.0dB]
Dry / Wet
Flanger
Feedback
High Damp (Type: Flanger)
Flanger
Dry / Wet
LFO Spread
[Dry, 99:1...1:99, Wet]
[000...30.0ms]
[000...127]
[000...127]
[Off, On]
[+, –]
49
Advertisement
Table of Contents
