System Exclusive Messages; Realtime Messages - Korg RK-100S Parameter Manual

Keytar
Hide thumbs Also See for RK-100S:
Table of Contents

Advertisement

RK-100S parameter guide

System exclusive messages

RK-100S format
F0: exclusive status
42: Korg ID
3n: [n=0–F] MIDI channel
00, 01, 19:
RK-100Smodel ID
ff: function ID (type of message)
|
F7: end of exclusive
Universal system exclusive
System exclusive messages include a special category of messages whose purpose
is officially defined. These are called universal system exclusive messages. Of
these universal system exclusive messages, the RK-100S supports Master Volume
and Master Fine Tuning.
Master volume [F0, 7F, nn, 04, 01, vv, mm, F7]
(vv: lower byte of value, mm: upper byte of value, [mm, vv=7F, 7F] is Max, [mm,
vv=00, 00] is 0)
When a Master Volume message is received, the RK-100S will adjust its overall
volume.
Master fine tuning [F0, 7F, nn, 04, 03, vv, mm, F7]
(A value of 8192 [mm, vv=40, 00] is center (0 cent, A4=440.0Hz), 4096 [mm, vv=20,
00] is -50 cents, and 12288 [mm, vv=60, 00] is +50 cents.)
When master fine tuning is received, the value specified for the RK-100S's
GLOBAL "Master Tune" will be ignored, and the overall pitch will be specified
by the data that was received.
64

Realtime Messages

Starting/stopping the arpeggiator
When the RK-100S's arpeggiator is synchronized to a connected external MIDI
device, system realtime messages Start and Stop will control the arpeggiator.
Start [FA]
When the Start [FA] message is received, the arpeggio pattern will be reset to
its beginning.
Stop [FC]
When a Stop [FC] message is received, the arpeggiator will stop. (It will not be
turned off; the arpeggiator will start again when additional notes are played.)

Advertisement

Table of Contents
loading

Table of Contents