Switching Between Phone Calls On Multiple Trunks; Mulap Conference Release - Siemens HiPath 2000 Operating Instructions Manual

Team and Executive/Secretary Functions With Trunk Keys
Step by Step
Switching Between Phone Calls on Multiple
Trunks
Precondition: You are conducting a call over a trunk in
your group. Another trunk key starts flashing.
Press the flashing trunk key. The first party is placed on
hold on the other trunk.
Press the slowly flashing trunk key. The second party is
placed on hold.
You can switch between the two call as many times as
you wish. Always press the slowly flashing trunk key.

MULAP Conference Release

If this function has been released (ask your service per-
sonnel), you can program the US: "MULAP Privacy Re-
lease" UK: "Privacy Release" key for your telephone
! Page 65.
If you press the programmed US: "MULAP Privacy Re-
lease" UK: "Privacy Release" key during a call (key lights
up), every user who programmed your MULAP line as a
key (key flashes) can join the call by pressing this key.
You do not have to press US: "Consult" UK: "Enquiry" or
"Conference" to transfer/accept the call. Your team part-
ner only has to press the flashing line key to join the
conference.
105