Bank Assy And Base Pad On The Paper Tray Assy - Brother MFC5890CN Service Manual

6.1.15 Bank ASSY and Base Pad on the Paper Tray ASSY

(1) Pull the four lock arms on the rear of the paper tray outwards and release the four latches of
the bank ASSY. Then pull the bank ASSY up and out of the paper tray.
(2) If the base pad needs to be replaced, peel it off the bottom of the paper tray.
Note: Once removed, the base pad will become unusable and a new pad will have to be put
back in.
Lock arm
Assembling Notes:
• When attaching a new base pad to the paper tray, align the edge of the base pad with the
front edge of the depressed section on the paper tray as shown above.
• When mounting the bank ASSY, first insert the four pawls into the openings in the paper
tray and then press the inside of the bank ASSY so that the latches snap into place.
Bank ASSY
Base pad
Unlatching the bank ASSY
Latch
Paper tray
Depressed
section Base pad
Paper tray
Pawls
Bank ASSY
6-73
Align the edge of the
base pad with the front edge
of the depressed section on the
paper tray.
Paper tray
(6_79_BHL9_A3_J)
Confidential