Icom IC-F9011 User Manual page 73

The compatibility of the previous and current scan The compatibility of the previous and current scan
mode:
Primary CH (Available when "Priority Scan" is
selected in Scan Type) Select the desired channel
as the primary channel. The selected channel is
monitored during priority scan.
Prio-A CH The priority A channel is used as the
primary channel.
Prio-B CH The priority B channel is used as the
primary channel.
Start CH The scan start channel is used as the
primary channel.
R. Sel CH R. Sel CH* The selected channel by the rotary The selected channel by the rotary
selector is used as the primary
channel.
CH Number The selected channel is used as the
Select primary channel.
* R. Sel CH is available for only portable radios.
Secondary CH (Available when "Priority Scan" is
selected in Scan Type) Select the desired channel
as the secondary channel. The selected channel is
monitored during priority scan. The secondary
channel is lower priority than primary channel.
Disable
The secondary channel is not used.
Prio-A CH The priority A channel is used as the
secondary channel.
Prio-B CH The priority B channel is used as the
secondary channel.
Start CH The scan start channel is used as the
secondary channel.
R. Sel CH* The selected channel by the rotary
selector is used as the secondary
channel.
CH Number CH Number
The selected channel is used as the The selected channel is used as the
Select secondary channel.
* R. Sel CH is available for only portable radios.
Scan
TX CH TX CH
Select the desired channel as the transmission
channel.
Last CH
Prio-A CH
Prio-B CH
Start CH
R. Sel CH*
CH Number
Select
* R. Sel CH is available for only portable radios.
Talk Back (Unavailable when "Last CH" is selected in
TX CH)
Turn the talk back function for transmission ON or
OFF. The function allows you to transmit a signal on
the channel that the scan stopped last, when the
transmission is performed during the scan stop the
talk back timer (after the resume timer has talk back timer* (after the resume timer has
passed).
When "OFF" is selected, the channel selected in TX
CH is always used for transmission.
* Talk back timer is set in Talk Back (Sec) in Scan
Setting screen.
Cancel CH
Select the desired channel that is selected when the
scan is cancelled (except for transmission).
Transmission is performed in the
channel that the scan stopped last.
If it is no last channel, the scan
start channel is selected for
transmission. t i i
Transmission is performed in the
priority A channel.
Transmission is performed in the
priority B channel.
Transmission is performed in the
scan start channel. scan start channel.
Transmission is performed in the
selected channel by the rotary
selector.
Transmission is performed in the
selected channel.
y p
73