Operation And Function Operation And Function - Icom IC-F9011 User Manual

■Front panel
①ANTENNA CONNECTOR
Connects the supplied antenna.
②DEALER-PROGRAMMABLE KEY [EMR]
Desired function can be programmed by your
dealer.
• [Emergency] is pre programmed as default. • [Emergency] is pre-programmed as default
③ LED INDICATOR
➥ Lights green while receiving a signal, or when
the squelch is open.
➥ Lights red while transmitting.
➥ The LED indicator indicates some information.
(Non-display model only)
④DEALER-PROGRAMMABLE ABC SWITCH
Desired functions can be programmed to each
position (A, B or C) independently by your dealer.
To activate the pre-programmed function, set the
white line of the ABC switch to the position A,
B or C.
When the white line of the ABC switch is
set to the position C, the pre-programmed
function at position C will be activated.
⑤CHANNEL INDICATOR ⑤CHANNEL INDICATOR
➥ Lights white according to the "Backlight"
setting of the user set mode.
➥ When you rotate [Rotary selector] to select the
channel or zone, align the desired
channel/zone number with this point.
24
4 Operation and Function
4-1-1 Operation and Function
Speaker
Microphone Mi h
Function Display *1
*1 Simple/10-key types only
*2 10-key type only
⑥DEALER-PROGRAMMABLE TOGGLE SWITCH
Desired function can be programmed by your D i d f ti b
dealer. When the toggle switch is set to the left
side (' '), the preprogrammed function will be
activated.
⑦VOLUME CONTROL [VOL]
Rotate to turn the power ON/OFF and adjusts the
audio level.
⑧ROTARY SELECTOR
Rotate to select the pre-programmed memory
channels or the operating zone. (Depending on the
pre-set value)
The channel/zone that is positioned to the
channel indicator (⑤) is selected as the operating
c a channel/zone. e / o e
⑨DEALER-PROGRAMMABLE KEYS
[I]/[II]/[III]/[ ] /[ ] /[ ]/[ ] (Simple/10-key
models only) Desired function can be programmed
independently by your dealer.
⑩APP KEY [APP] (Simple/10-key models only)
Desired function can be programmed by your Desired function can be programmed by your
dealer.
⑪10-KEYPAD (10-key model only)
The keypad allows you to enter digits to:
• Select memory channels, tone channels and
DTMF codes (while in the DTMF code channel
selection mode.)
• Start up with the password St t ith th
• Input the Individual ID code for digital operation.
(Depending on the pre-set value)
⑫HOME KEY [HOME] (Simple/10-key models only)
Desired function can be programmed by your
dealer. • [Home] is pre-programmed as default.
⑬PTT SWITCH [PTT]
Push and hold to transmit; release to receive.
⑭DEALER-PROGRAMMABLE KEYS
[Side1]/[Side2]/[Side3] Desired function can
be programmed independently by your dealer.
⑮MULTI CONNECTOR
⑮MULTI-CONNECTOR
Connect optional equipment.
▒ NOTE: Attach the connector
▒ cover when the optional
▒ speaker-microphone is not used.
g d b
d
Multi-connector cover