Icom IC-F9011 User Manual page 64

•Coverage Type
Select the coverage type for the area that the radio
is allowed to roam from UNRESTRICTED, SYSTEM,
RFSS, SITE and CHANNEL.
UNRESTRICTED The roaming area is unrestricted
for the radio.
SYSTEM The Home WACN ID and the
Home System ID need to match Home System ID need to match
to the repeater.
RFSS The Home WACN ID, Home
System ID and RFSS ID need to
match to the repeater.
SITE The Home WACN ID, Home
System ID, RFSS ID and Site ID
need to match to the repeater.
CHANNEL The Home WACN ID, Home
System ID, RFSS ID and Site ID
need to match to the repeater.
•Hunt List
Select the desired Hunt List from 1 to 4.
When the radio is powered on, changes trunking
system, or goes out of range, the radio will find a
control channel in a valid area with the hunt list.
List control channels in the Hunt List screen.
When a hunt list with no valid channel is selected,
"X" appears in the cell and "System Registration" in
the tree view screen.
•Roaming List
Select the desired Roaming List from 1 to 4.
The radio will move to a system using the roaming
list to find a channel that has higher quality, or list to find a channel that has higher quality, or
provides better services.
List roaming addresses in the Roaming List screen.
When a roaming list with no valid area is selected,
"X" appears in the cell and "System Registration" in
the tree view screen.
•CH ID List •CH ID List
Select the desired CH ID List from 1 to 4.
List channel identifiers in the CH ID List screen.
64
APCO P25 Trunking –
Clone soft Setting
When a CH ID list with no valid channel is selected,
"X" appears in the cell and "System Registration" in
the tree view screen.
•Scan Timeout Enter the time period for the radio to
scan a control channel while trying to detect a
synchronized frame within the range of 0 to 60 sec
(in 0 001 sec steps) The value should not be 0 (in 0.001 sec steps) The value should not be 0.
•Scan Threshold (dBm)
Set the minimum quality level for a control channel
within the range of -120 to -70 (in 1 steps).
When the Received Signal Strength Indication (RSSI)
level is higher than this set level, the receiving signal
is recognized as a control channel.
•Mode Timeout Enter the time period for the radio to
scan a frequency while trying to get control channel
information within the range of 0 to 60 sec (in 0.001
sec steps).
Background Scan Setting
Enable the background scan to monitor a control
channel of the adjacent site while waiting to register
a control channel. Select "Enable" to activate the
function.
•Interval (Sec) (Available only when "Enable" is
selected in Enable above)
Enter the interval time for background scan function
within the range of 0 to 60 sec (in 0.001 sec steps).
Interval determines how often the radio monitors a
control channel of the adjacent site.
•Duration (Sec) (Available only when "Enable" is •Duration (Sec) (Available only when Enable is
selected in Enable above)
Enter the duration of time for back ground scan
function within the range of 0 to 60 sec (in 0.001 sec
steps). The radio monitors the adjacent channel and
checks whether there is a valid signal or not for up to
this duration.