Scan - Icom IC-F9011 User Manual

■Scan List
A total of 17 scanning groups are available for a
wide variety and flexible scanning operation. In this
screen, program scanning condition for each group.
Channels included in the scan group [Zone] are
scanned when the channels are in the same zone
with the scan start channel. with the scan start channel.
▒ NOTE:
▒ Select channels to be included in the desired
▒ scan groups in Scan List in the Zone screen.
■Display Text
Enter up to a 24-character text for easy recognition
of the scan group of the scan group.
The programmed texts are indicated in the scan
selection mode.
■Scan Type
Set the scanning type to each scan group from
0) Scan OFF, 2) Normal Scan and 3) Priority Scan. ) )
The watch time period, the power ON scan function
etc. are programmable in the Scan Setting screen.
0) Scan OFF:
Scanning operation is turned OFF.
If selected, the following scan settings are
unavailable.
1) Normal Scan:
Normal scan. Scans all selected channels. The scan
proceeds in sequence.
72
4-4

Scan

) y
2) Priority Scan:
Priority scan. "Primary CH" and "Secondary CH" are
used as the priority channels. Selected channels are
scanned in sequence while monitoring "Primary CH"
and "Secondary CH." When scan is paused on
"Primary CH," other channels are not monitored.
▒ ▒ NOTE:
▒ "Prio A" stands for "Primary CH," and "Prio B"
▒ stands for "Secondary CH."
➣ When "Secondary CH" is not set:
When a signal is detected on a channel other than
"Primary CH," scan pauses until the signal
disappears and "Primary CH" is continuously di d "P i
monitored. Scan moves and pauses on "Primary
CH," if the signal is detected on "Primary CH".
➣ When "Secondary CH" is set:
When a signal is detected on a channel other than
"Primary CH" or "Secondary CH," scan pauses until y
the signal disappears and "Primary CH" and
"Secondary CH" are continuously monitored
alternately. Scan moves and pauses on either
"Primary CH" or "Secondary CH", if the signal is
detected on "Primary CH" or "Secondary CH".
➣When a signal is detected on "Secondary CH,"
scan pauses until the signal disappears. scan pauses until the signal disappears
CH" i ti l
y , p