Icom IC-F9011 User Manual page 58

■ Connections
All cloning operations are performed from the computer's keyboard— the operation required on the transceiver
side is;
1 First, connect the cloning cable as illustrated below.
2 Then, rotate [VOL] to turn power ON.
Screen description
➊ ➋
1. FILE MENU [File]
Used for saving memory channel contents,
printing the pre-programmed information or
exiting the program, etc.
2. VIEW MENU [View]
• Selects the displayed font size.
• Turn the tool bar indication ON or OFF.
3. COM PORT MENU [COM Port]
• Click to display the COM port (1 to 4 and More)
setting dialog box.
• Set the transfer speed (Normal or High).
▒ NOTE: 'Check the following' dialog box appears
▒ when the COM port is not set correctly.
4. CLONING MENU [Clone]
Click to display the cloning menu and cloning
information dialog box.
58
Basic Setup of Cloning Software
➌ ➍ ➎ ➏ ➐
➑ ➒
5. Adjust
Program the adjustment frequencies in the zone
screen.
6. HELP MENU [Help] 6 HELP MENU [Help]
Click to display the help contents and cloning
software revision information.
7. TOOL BAR
Shortcut buttons appear on the tool bar when the
tool bar indication is turned ON in the [View]
menu.
8. TREE VIEW SCREEN 8 TREE VIEW SCREEN
Click the folder icon which you want to edit.
9. CONTENTS LIST SCREEN
Display the contents list (Memory CH information,
Common settings, etc.).
Attaching:
Attach the
connector cover t
( ), then
tighten the
screw ( ).
Detaching:
Unscrew ( ), ( ),
then detach the
connector cover
( ).