Icom IC-F9011 User Manual page 54

This list shows each function that is supported by P25 trunking mode, by P25 conventional mode, or by both.
1 Multiple Network Support
2 Internetwork Services
3 Announcement Group Voice Call
4 Broadcast Voice Call
5 System Voice Call
6 Unit to Unit Call
7 Unit to/from PSTN
8 Unit to PSTN Explicit Dialing Live Key Mode
Unit to PSTN Explicit Dialing Buffered
9
Mode
10 Unit to PSTN Explicit Dialing List Mode
11 Emergency Call Request/Indication
12 Multiple Level Priority Call Request
13 Rx P25 Squelch: monitor, normal,selective
Tx P25 Squelch: None, Status
14
Symbols,Carrier, Own Nacs, Other Nacs
15 Channel Hunt
16 Channel Hunt List
17 Channel Hunt Frequency Scan
18 Channel Scan
19 Priority Channel Scan
20 Background Scanning
54
4-1-9 APCO P25 Trunking and Conventional
Basic functions
Trunking Conventional
System System
Functions
Enable the radio to operate on the
multiple different networks by
selecting new parameter in SU.
Internet service. Check if the
application is accessible to the
internet or not.
Similar to Broadcast Voice Call
Voice group call with no indication
of Source ID.
All ID Call functions.
Individual call. Voice group call with
no indication of Source ID.
Call from the radio terminal to the
telephone network or vice versa.
Dialing function from the radio
terminal to the telephone network,
indicating adaptability to the dialing g p y
message of the trunking packet
Same as No.10
Same as No.10
Emergency call/Indication
Call request with priority level Call request with priority level.
Priority level is set by control CH.
Rx squelch behavior
Same as BUSY LOCK OUT before Tx
Hunting control CH
List of Control CH to hunt
Fix the frequency of the control CH
to search by conditions such as
carrier sense.
Scanning channels.
Scanning priority channels.
Same as the BBS in MPT-1324,
looking for better channel than the
one in current use.
g