Icom IC-F9011 User Manual page 35

◇ Time and date settings
Push [Clock] to indicate the current time and date
on the LCD.
Push and hold [Clock] for 1 sec to enter the time
and date setting mode.
•The time indication format, "24HR" or "12HR"
blinks.
Push and hold [Clock] for 1 sec to enter the time
and date setting mode. and date setting mode
•The time indication format, "24HR" or "12HR"
blinks.
Push [CH Up] or [CH Down] to set the selected
item.
Push [ Clock ] to set.
The next item blinks.
Repeat steps to
After setting, push and hold [ Clock ] for 1 sec to f
program.
•Return to the time and date setting mode.
Push [Clock ] to return to the stand-by mode.
Basic Operation
to set items.
C f 1
■ LED indicator
The LED indicator indicates some information as
follows: (Ref.: R=Red, G=Green, O=Orange)
•The indicator lights ( or blinks ) orange when the
optional battery case is attached.
•While hunting in trunking mode, the indicator
blinks the same way as Fast/Slow Scan.
•Orange blinks when receiving the coded voice
signal. i l
(Non-display model only)
35