Icom IC-F9011 User Manual page 28

▒ User set mode is also available via the 'Power ON
▒ function.'
CLOCK KEY "CLCK"
Push to display the current time on the LCD.
While the current time is indicated, push and hold
this key for 1 sec to enter the time data edit mode.
SCAN ADD/DEL (TAG) KEY "SCAD"
Push to add or delete the selected channel to/from
the scan list.
1. Push to indicate the scan list, then push [CH Up] or
[CH Down ] to select the desired list.
2. Push to add or delete the channel to/from the
selected scan list.
3. Push and hold for 1 sec to exit the scan list
selection mode.
MENU AND MENU KEYS
([Menu ] and [Menu ] can only be assigned to
[ ] and [ ], respectively.)
The menu mode is available when either [Menu ]
or [Menu ] is assigned to [
During menu mode, the pre-programmed menu
items (up to 15) are selected by the [I], [II] and [III]
keys.
Push [Menu]/[Menu] to switch the previous/next 3
menu items, and push [I], [II] or [III] to activate the
programmed function.
◇For ABC and Toggle switches only
ZONE SWITCH
Selects the pre-programmed zone directly.
PRIO A AND PRIO B SWITCHES
Selects Priority A or Priority B channel.
28
Functions Programmable to Keys
[ ]
] or [ ].
MR-CH 1, MR-CH 2, MR-CH 3 AND MR-CH 4
SWITCHES
Selects the memory channels 1,2,3 and 4, directly.
TALK-AROUND SWITCH (Conventional operation only)
Turn the talk-around function ON and OFF.
The talk-around function sets the transmit frequency
to be the same as the receive frequency for
transceiver-to-transceiver communication.
LOCK SWITCH
Turns the lock function ON and OFF.
All programmable keys except the following are
locked:
[ [PTT], [Moni], [Light], [Lock], [Emergency Single], ], [ ], [ g ], [
[Emergency Repeat], [ Surveillance] and
[OPT 1/2/3].
HIGH/LOW SWITCH
Selects the transmit output power temporarily.
Ask your dealer for the output power level for each
selection.
SURVEILLANCE SWITCH
Turns the surveillance function ON or OFF.
When this function is turned ON, the beep is not
emitted and the LCD backlight does not light when a
signal is received or a key is pushed, etc.
COMPANDER SWITCH
Turns the compander function ON and OFF. T th d f
The compander function reduces noise components
from the transmitted audio to provide clear
communication.
OPT MOMENTARY SWITCHES
Controls the output signal level from the optional
unit connector.
], [ g y g ],
ti ON d OFF