Icom IC-F9011 User Manual page 61

Digital
Individual Individual
Set the individual ID with hexadecimal or decimal
format and enter the ID name.
Talk-group
Set the talk-group ID with hexadecimal or decimal
and enter the ID name.
Status Status
Set the Rx and Tx status.
Short message
Enter up to a 12-character message that will be
displayed at transmission and reception of a short
message. Ten messages are available.
Page
Page call is designed to notify the targeted radio
user who may be away from his/her radio or in
noisy environment with alert and indication. Select
'enable' if required.
Radio Check
Radio check call is designed to determine
whether the targeted station is turned on, within
the communication range and on channel without
requiring any action to the targeted radio user. This
call causes a targeted radio to send an
acknowledgment automatically.
Select 'enable' if required.
Radio Inhibit/Un inhibit Radio Inhibit/Un-inhibit
The radio inhibit (stun or kill) calls/or/un-inhibit
(revive) cause the targeted radio to automatically
send an acknowledgment and to be
unusable/or/usable.
Cloning Items
g
Remote Monitor
Set the TX to make a call to listen to the targeted Set the TX to make a call to listen to the targeted
radio's audio frequency without requiring any
action from the targeted radio user.
Phone Number List
Make a list for easy recognition of the phone
number.
Option
Optional functions are selectable in Individual,
Talkgroup, Config, Call option, and encryption.
Expert
Set P25 Parameters, Lockout, and scan extension
time.
Trunking
Trunking enables further effective channel
management by sharing a minimum of channels
with a large number of users. Set in System
Registration, Hunt List, Roaming List,
and CH ID List. Please see
Soft Setting for details.
OTAR
OTAR (O er The Air Reke ing) is the common name OTAR (Over-The-Air-Rekeying) is the common name
for the method of changing encryption keys in a
two-way radio system over the radio channel ("over
the air"). The keys can be changed over the IP
network (SNDCP setting is required).
DTMF
DTMF Autodial
Enter the DTMF Code and Text.
4-2-3 APCO P25 Clone
61